Power Boat, Speed Boat 29"

Description

Inspirated From Wersy'S Boats, I Decide To Build A More Powerfull Boat. After Browsing The Whole Net, I Found Nothing To Be Good Enough To Be Printed. So I Sit Down At My Pc And Draw A New One.The Idea Was To Build The "Mystic Miss Geico". Now It'S Ready To Be Posted. It'S A 29" Catamaran And I Think It'S Very Fast As An 3D Printed Boat. I Printed It With Pla (Easy To Print) With The Standard Settings: Outer Shells 3 Bottom Layers 3 Top Layers 3 Infill I Used Is 20% Except 3.Stl And V.Stl They Are 10% All Files Are Arranged To Print Without Support Material, The Best Glue For Pla Is Dichlormethan, You Can Find It On Net, And Put Some Small Pieces Of Pla Into It (Ca.20-30%Pla) For A Few Hours, So You Get A Very Good Glue For Pla I Posted The Whole Hull And Cockpit, If Someone Want To Cut Or Scale It By Himself Good Succeed The Videos You Can See Here: Https://Youtu.Be/Otwggegwpyc Https://Youtu.Be/4Wljyllcvxa Ps: We Glued The Inner "Hole" With One Thin Fiber Glass Layer, It Seems To Be Unstable. The Fantastic Airbrush Did A Friend Of Mine,It'S Awesome Post 9.08.2017 I Posted Some New Stl Files To My Project, I Splited The Whole Hull In The Left And Right Side, For People With Smaller Printers I Hope This Is Helpfull , Now You Can Rotate And Cut The Height By Yourseft Specialy For Your Printer

Statistics

Category

Tags