Garud-500 DIY Drone
Description
Garud-500 Is A Fully 3D Print Ready Diy Drone Design Kit, Specially Developed For Enthusiasts Who Dream To Build Their Very First Custom Drone Using 3D Printing. This Garud-500 Can Be 3D Printed In Commonly Used Pla Or Abs Material And Can Be Assembled Without Any Hassles. The Main Frame Board I.E. Top & Bottom Plate Are Designed To Bear Excessive Forces During Acrobatic Flights While The Arms Are Designed With Landing Gears To Reduce Additional Connecting Weight & Prevent Damage During Landing. Garud-500 Can Be 3D Printed With Below Print Specifications: - Layer Height: 200 - 300 Microns - Infill: 30% (50% For More Strength) - Infill Pattern: Rectilinear - Shell Thickness: 0.8Mm - 1.2Mm - No Support Required - Rafts Enabled - Temperature - 210 C Pla | 230 C Abs Bom - (Choose Your Parts Wisely) - 4 X Arms (3D Printed) - 1 X Top Plate (3D Printed) - 1 X Bottom Plate (3D Printed) - 16 X M5 Bolts 20Mm Length - 16 X M5 Nuts - 4 X Brushless Motors (2206 - 3600 Series | 700Kv - 1200 Kv) - 4 X Esc’S (30A - 40A) - 4 X Propellers (8045 | 9050 | 9060 | 1045 | 1050) - 1 X Flight Controller (Naze 32 | Open Cc3D | Apm 2.7 | Pixhawk | Dji Naza V2) - 1 X Lipo Battery (2200Mah - 5000Mah | 3S - 4S) - 1 X Radio Controller (Taranis | Flysky Fs-I6)
Statistics
Likes
760
Downloads
0