High Speed Cuvette
Description
The General Purpose Of These Designs Are Described In “3D Printed Uv-Vis Cuvette Adapter For Low Cost And Versatile Spectroscopic Experiments”, Which Is Published In The Open Access Journal Acs Omega. Link To Publication: Http://Pubs.Acs.Org/Doi/Abs/10.1021/Acsomega.7B01310 This Particular Part Is Meant To Mimic Traditional Quartz And Glass Uv-Vis Spectrometer Cuvettes. In This Design, We Have A Path Length Of 10 Mm And A Sample Volume Of Approximately 2.4 Ml. This Cuvette Can Be Used In Most Standard Uv-Vis Spectrometers.This Design Differs From The "Standard" Cuvette Only In The Label On The Side. We Recommend Printing This Design With A Black Filament To Reduce The Amount Of Light Scattering. An Instructional Video To Assemble The Spectrometer Is Shown Below (Post-Printing) With The Materials Used Listed. Either Quartz Or Glass Windows Can Be Used Depending On The Spectral Range Needed Of The Cuvette.
Statistics
Likes
1
Downloads
0