12 mm laser mount for atlas 3d scanner
Description
This Is A Quick And Dirty 12Mm Laser Mount For The Atlas 3D Scanner. (For The Printed Version Of The Scanner. Will Not Fit The Acrylic Enclosure) May Be Usable In Other Applications As Well. Includes The .Stl File And The Rsdoc File That Can Be Edited In Design Spark Mechanical. Mix To Your Heart'S Content. Use This Mount For Left Or Right Side. Note** Will Require Some Reduction (Grinding To Remove Where It Is Too Long For Hole To Line Up.) On The Rounded Side Where The Hole Is For Mount To The Arm. It'S About 1/8 To 3/16 Too Long Past The Hole. Either Edit In Design Spark And Re-Share Or Grind It Off A Little On A Bench Grinder Or Something. I Don'T Care To Re-Edit It Personally Because Mine Fit Now After Grinding A Little Off. The Distance From The Center Of The Laser To The Mount Hole For The Arm Is Correct Though And I Get Good Scans With It.
Statistics
Likes
15
Downloads
0