Tevo Tarantula Direct E3D Titan X-Carriage with BLTouch
Description
This Is My Own Remix Of Tevo Tarantula Direct E3D Titan X-Carriage Made By Puma1824. I'Ve Mad This Because I Have An Unused Nema17 Motor 28Mm 17Hs2408, And That Motor Is Cheaper Than Pancake Motors. I Have To Change Dimensions Of The Tensioner Because There Is To Tight. Thats All Folks, Have Fun ;-) Additional Info Based On Puma1824 Description: Important: Because The Endstop Was Relocated, You Will Need To Make A Few Changes In Your Firmware And Hardware. The Following Changes Were Done Using Marlin 1.1 Rc7 & Mks Base 1.2: Uncomment Define Use_Xmax_Plug Changed X_Home_Dir From -1 To 1 Moved The Connector On The Mks Board From -X To +X Additional: May Need This As Well. Thanks Xfirax For The Heads Up! Define X_Max_Endstop_Inverting False // Set To True To Invert The Logic Of The Endstop X & Y Probe Offset(S): Bltouch: X Probe Offset From Nozzle: 20Mm Y Probe Offset From Nozzle: 65Mm
Statistics
Likes
15
Downloads
0