3x5 grate
Description
3X5 Grate. This Model Was Made So That I Could Have A Grate For A Dnd Styrofoam Ship Model I Was Working On. The Images That You See Is The First Iteration Of The File, That Model Needed A Lot Of Fixing So I Edited And Replaced It With Two New Files. The First File Is The Grate With Out An Edge, Meaning It Should Be Flush With The Styrofoam (I Would Print This Piece Grate Face Down). The Second Model Is The Grate With An Edge, So Essentially The Grate Will Have A Little Lip On The Top Making The Edge Of The Grate A Bit Higher That The Styrofoam (This Is A Tricky Print, I Would Print It Sideways With Support In The Middle.
Statistics
Likes
11
Downloads
0