Soldering Fume Extractor for 120mm Fan
Description
**Work In Progress, Picture Uploads To Come. This Is A 3D Printed Fume Extractor For A Zalman Cnps10X Optima 120Mm Cpu Fan I Had Lying Around. May Fit Similar Cpu Fans. Required: - 120Mm Cpu Fan (Zalman Cnps10X Optima 120Mm) - Carbon Filter (Carbon Filter, Esd, Activated, 5Pk For Hakko/Xytronic/Aoyue Smoke Absorber) - 12Vdc Power Supply/Wall Wart (Try Ebay, Ac 100-240V Dc 12V 1A 1000Ma) - 2X 2.54 Pin Header - Ac Wire Plug With Switch (From An Old Lamp) - Cable Ties Or Twist Ties [Optional Lamp] - Led Driver (Try Ebay, 3W Led Driver Ac 85~265V 700Ma Output 3V - 6V) - Led (Nichia 219B 4500K High-Cri On 14Mm All Copper Mcpcb Star) - Heatsink Aluminum 38Mm X 17Mm X 11.5Mm - Aluminum Foil - Double Sided Sticky Tape - Glue, Could Be Ca/Superglue This Might Not Be Super Useful To You Since It'S Modeled For Some Specific Spare Parts I Had Lying Around. Assembly Is Fairly Straight Forward, Take A Look At The Pictures.
Statistics
Likes
25
Downloads
0