Qidi X-One LED Switch Box
Description
The Led'S In The Qidi Tech X-One Printer Are Always On When The Printer Is On. There Is No Way To Turn Them Off. I Don'T Need The Led'S On While I Am Asleep, So I Installed A Toggle Switch. I Really Wanted A Rocker Switch, But The Hardware Store Only Had Toggle Switches. So I Ended Up With An Ugly Toggle Switch From The 1950'S. The Housing Mounts Onto The Threaded Posts That Used To Hold The Cable Clips On. The Housing Has A Little Cut Out In The Corners To Allow The Cables To Enter And Exit. I Didn'T Have A Nut Driver For The M3 Nuts, So I Made One: Https://Www.Thingiverse.Com/Thing:2454748 I Might Reprint This In A Temperature Resistant Material Someday.
Statistics
Likes
22
Downloads
0