Interpretation of 'vision box'
Description
I Like The 'Vision Box' By João Miranda. My Interpretation Based On A 3D-Printed Foot With Magnet Inserts. Secret Lid Is Printed Too. The Sides And The Cover Of The Housing Are Made Of (Laserable) 2Mm Plexiglas. 2X Side 35Mm X 32.5Mm 2X Side 35Mm X 50.5Mm 1X Cover 37Mm X 51.5Mm + 32.5Mm X 45.5Mm In Black The Magnets Are Invisible, But The Lid Is Not So Well Covered. In White You See The A Shadow Of The Magnets, But The Lid Is Almost Invisible. So... You Can Print The Lid Also In Two Peaces Using The "....1_0" Files. For The Foot/Stand I Use 10Mm Diameter X 2Mm Height Neodym-Magnets. For The Lid 10Mm Diameter X 0.6Mm Height. It Is A Bit Tricky To Put The 2Mm Magnets In, While The Printer Is Working. Pause Will Help. The 0.6Mm Are Just Stick With Double Sided Scotch. Later They Are Covered By The Double Sided Tape Anyway. Hope João Miranda Will See It As A Tribute And As Not Stealing. The Reinvention Took Me A Lot Time. Buying Had Been Easier.
Statistics
Likes
46
Downloads
0