Another Y tensioner for AM8 frame
Description
Updates 17/09/2017 Uploaded A Shorter Version, Since It Makes No Sense That The "U" Part Is So Long. This Version Requires A Slightly Longer Y Belt. Updates 16/08/2017 Removed Most Of The Play Along Z In Y Tensioner Case. The Other Two Pieces Remain The Same. This Is A Different Y Belt Tensioner For Am8 Frame By Pheneeny. Works With The Original Y Stepper Mount, So It Is Fully Compatible With Stock Am8. I Made Myself This One, Which Is More Rigid And Has Almost No Play Around Z Axis, It Just Lets Move Back And Forth, Unlike Many Tensioners Based On Two Bolts And/Or Two Sections. It Should Have Approx 5Mm Stroke, Which Is More Than Enough To Give The Belt That Last Bit Of Tension. Should Work With Toothed Idler Mod. Added A Cutaway View To See The Assembly More Clearly. Assembly: -M4X24Mm Hex Bolt -M4 Nut -5 Or 6Mm Diameter (20-25Mm Long Spring) -M3X24Mm Allen Bolt -M3 Nut -M3 Washers (Optional, But Highly Recommendable Between Moving And Stationary Parts, And Also Between Bolts/Nuts And 3D Printed Parts)
Statistics
Likes
467
Downloads
0