Pumps (t9.33)

Description

Experiment With Concealed And Slanted Platform Notes To Printers: Original Scaling Fits Size 8Usw (~39Eu), Only Uniform Scaling Reconmended Print In Upright Position 4.206T9.33Preview.Stl Is A Preview (Duh) And Not Intended For Printing Use 4.206T9.33Lc.Stl And 4.206T9.33Rc.Stl If Your Printer Can Print At Least 203Mm High For 100% Scaling, Else Try 4.206T9.33L.Stl, 4.206T9.33R.Stl, 4.206T9.33L2.Stl, And 4.206T9.33R2.Stl, Which Require 172Mm Height At 100% Scaling. Reconmended To Print In Abs, Pla Is Possible, But Probably Structurally Inadequate Open The Hole In The Bottom Of The Heel After Printing To Install A 131X6Mm Steel Threaded Rod, Keep In Mind That These Dimensions Change When Scaled To A Different Size! Cut The Heel Core Only To Size After Inserting Printable In One Piece Infill >30% Reconmended Print Support From Buildplate Only The Fin Spanning The Heel And The Sole Is Meant To Be A Custom Support, Remove After Inserting The Heel Core, Before Acetone Treatment

Statistics

Category

Tags