Filament Guide for Tronxy Prusa All Metal (Two Ways)

Description

This Is A Guide For The Filament In The All-Metal Tronxy Prusa I3. Mine Was Sold By Rojo3D (In Argentina). This Gives You A "Bowden Style" Way To Feed The Hotend. The Filament Does Not Grind Over The Feed Hole Anymore. Also, Is Able To Work Two Ways: With The Filament Above The Center Wheel, Or Below It. A Nice Thing Is The Threaded Rod And Nut To Attach It Through The Printer'S Frame Hole, So You Can Put It In Every Angle. Just Needs Three 608 Ball Bearings (The Ones Used For Spinners). Shorter Version: I Made A Different Version (Indicated By "_Short"), With The Center Wheel Nearer To The Side Wheels, So The Filament Stays Always In Between Wheels. It Works Better When The Printer Heads Moves Back And The Filament Has To Move Backwards. For The Less Friction Possible, Use The Tush (Https://Www.Thingiverse.Com/Thing:2047554) As A Spool Holder. Made In Sketchup. Feel Free To Modify It In Order To Use It With Your Printer Frame.

Statistics

Category

Tags