mini Air Filter (45mm fan)

Description

This Is A Small Air Filter, Which Is Powered By A 45X10Mm Dc Fan. The Filter Mainly Consists Of The Fan And Four 3D Printable Parts. They Are Called Intake Tunnel, Lid, Fan Entry Mount And Fan Exit. The Air Filter Is Designed To Work As Follows: 1. When The Fan Is On And The Filter Is Capped With The Lid, Air Should Be Sucked Into The Filter Through The Air Tunnels. 2. The Air Should Flow Down To A Small Volume Where Active Carbon Is Stored There. 3. The Filtered Air Should Flow Through The Grid Underlain And Enter The Fan. 4. Finally, The Air Should Be Propelled And Blown Out Through The Nozzle.

Statistics

Category

Tags