Nozzle Fan 60mm Prusa i3 MK2S Upgrade
Description
Hello Fellow Prusa I3 Mk2S Maker ------------------------------------------------ After Discovering The Good Looking [60Mm Fan Part](Https://Www.Thingiverse.Com/Thing:2342067) From [Christian Auth](Https://Www.Thingiverse.Com/Druckbaer/About), I Was Exited To Print It. Just To See That The Stls Are Missing. So I Sat Down And Made My Own Version Of It. Now You Can Print It With Any Material You Print With And Not Just With The One Who Is In The Gcode Files :-) New Part --------------- The Goal Of The New Part Was To Be Basic, Streamlined, Functional And Not Too Much Space Consuming. This Was Partly Achieved By Using The 1.5Cm The Prusa Fan Is Using. However Due To The Extruder Motor Ontop This Was Only Possible To An Extent. Please Post Your Makes :-) Assembly ------------- Remove Old Fan From The Extruder Cover And Leave The "Hot" Piece In Place It Is Used By This Part. You Can Use The Guide On The Left Side To Position It Correctly. It Is Not Aligned With The Extruder Motor. Buy This Fan: Http://Noctua.At/De/Products/Fan/Nf-A6X25-Flx/Specification Solder The Wires Together, Or Crimp Them.... And Screw Fan Onto Mount .-) History: -V1: Initial Release -V2: Made The Nut Hole Fit -V3: Made The Fan Hole A Bit Bigger
Statistics
Likes
74
Downloads
0