Remix; Whpthomas' RJ45 X-Cable Repair - Mounts
Description
An Addition To Whpthomas' Rj45 X-Cable Repair, Mounts For The Rj45 Jacks. Two Mounts To Protect The Jack And Make It Easier To Install. The Vertical Mount To Attaches To The Side Of The Carriage With Two Cable Ties (Zip Ties) And A Little Bit Of Adhesive On The Adjacent Surfaces. Make Sure To Seat The Mount As Far Down As It Will Go On The Cartridge, Otherwise The Cables Will Get Bound Up When The Cartridge Moves All The Way Forward. The Horizontal Mount Can Be Attached To The Inside Of The Frame On The Vertical Post Behind The Lcd Panel, But Be Wary Of The Other End Of The Cable Getting Hung Up If The Mount Is Placed Too High. Or The Mount Can Be Placed On The "Floor" Of The Bot With Your Choice Of Adhesive. Also, Check The Configuration Of Your Cat Cables, It Might Have A Crossover Scheme. The Arrangement Of The "In" Wires May Not Be In The Same Arrangement At The Other End Of The Cable. Http://Blog.Showmecables.Com/Rj45-Pinout/ Whpthomas' Rj45 X-Cable Repair Https://Www.Thingiverse.Com/Thing:217494 I Found My Parts Through Fastenal (Us). Kj45 Jack (5Perpack) / $25For2Packs / Part#; 0762368 Punchdown Tool / $10 / Part#; 0762445 Cat5E 5' Cables / $5 / Part#; 0762476 *I Have Yet To Shorten My Cables To A Good Length
Statistics
Likes
3
Downloads
0