Thermoworks Smoke Receiver Armored Cover
Description
This Is An Armored Cover For The Receiver Of The Thermoworks Smoke Remote Thermometer System. After My First Use I Found I Was Getting Bbq Fingerprints On My Receiver, And It Was A Bit Smooth, Making It Hard To Hold Onto With Oily / Wet / Greasy Hands. Also If I Had The Receiver Around My Neck, I Was Banging The Receiver Against Things When Bending Down Etc. So For Fun I Thought I Would Try Creating A Cover For It. It Worked Out Pretty Well, However My First Version Did Not Have A Hole In The Back. Which Made It Very Hard To Remove When Using The Sainsmart Semiflex Tpu. So I Designed A Second Version With A Hole In The Back, So That You Can Press The Receiver Out More Easily. This Was Much Easier To Remove. There Are Three Files Included: 1- Standard Version, Smooth Bottom, Without A Finger Hole. 2- Standard Version, Smooth Bottom, With A Finger Hole In The Back. 3- Hexagonal Pattern On The Bottom, With A Finger Hole In The Back. I Have Not Tried With A More Flexible Filament Yet, So Something Like Ninjaflex Or Other Very Soft Filament May Not Require A Finger Hole In The Back. I Do Not Recommend Printing This With Standard Filaments. The Fit Is Very Tight, And You May Not Get The Receiver Back Out Without Breaking The Case.
Statistics
Likes
7
Downloads
0