Hypercube Evolution XY carriage (NO Brass inserts needed and less rod play version)

Description

No Brass Inserts Needed On This. It Uses Standard M3 Nuts. Https://Www.Facebook.Com/Groups/Hypercubeevolution/ Its Been A While Since I Made These But I Think Both Versions Use 8Mm X Axis Rods But The Difference Is One One Version Uses 8Mm X Rods And The Other Uses 10Mm Y Rods. If You Need A Version That Uses 10Mm X Axis Rods I Saw Someone Had Remixed It On Here Some Place. If You Like This You Might Like The No Brass Inserts X Carriage Bearing Holder Also: Https://Www.Thingiverse.Com/Thing:2436180 8.5.17 8Mm X, 8Mm Y...Remix Of Https://Www.Thingiverse.Com/Thing:2437440/#Comment-1465527 Modifying The Xy Carriage To Add Stability To The 8Mm X Axis Rods. I Do Not Like How Much Play There Is At The Hot End With The Stock Carriage. If This Does Not Fix The Issue I Will Change To 10Mm Hollow Bearing Rods (Not The Carbon Or Aluminum Crap People Are Using.) Added Generic Belt Tensioner For My Belt That Connects The Two Z Steppers 8.7.17 Uploaded The Simplify3D .Factory File With Supports For The Xy Carriage That I Created With Simplify 3D For Use On My 300X300Mm Creality Cr-10 Printer The Carriages Use Standard M3X35Mm Screws With Lock Nuts But You Could Get Away With M3X30Mm Regular Nuts If Thats All You Have Available. *** The 3030 Optical Sensor Board Holder Here I Did Not Create. Just Tossing Up For People To Modify If If Does Not Align With The Flag. My Machine Does Not Have The Standard 100Mm Carriage Frame Spacing So I Made A Custom Optical Board Sensor Holder. ********* 8.8.17 Added Y Flag With Some Cutouts To Clear The Screw Nearby. Rev. 4,1 Added 10Mm Xy Carriage And Clamp. Need To Print Test The 10Mm Version. 8.12.17 Added Some Stuff For A Z Axis Flag Sensor Holder That Hangs From The 3030. Its Not A Standard Hypercube Evo Length ***** Added An X Flag That Is 0.5 Thicker And 1Mm Longer To Make Up For The X Carriage Getting In The Way Of The Flag A Little. ********* I Prefer This X Axis Optical Flag To The Stock One. 9.17.17 A User Commented This Was A Tight Fit For His X Axis Rods. We Likem That Way :) You May Need An 8Mm Drill Bit To Debur The Rod Holes. 1/22/17 Added A 10Mm X And 10Mm Y Version That Someone Modified. Havent Tested Myself But Will Test When My Hollow 10Mm X Axis Rods Arrive. ( Put This On Hold For A While, The 8Mm Rods Are Working Fine.. My Machine Is Basically 350X350. Any Bigger And 10Mm Rods Might Be Better) 6.30.18 Added 2 Y Carriages. 10Mm Y 8Mm X Axis Carriage With First One Named: 2.8_6.2Mm_Nuts_10Mm_Y_Carriage_.Stl This One Has 2.8X6.2 Nut Slots 2Nd New One Added Has The Biggest Nut Slots: File Name: Widest Y10_X8_Top_2.8_6.2_Bot_2.85_6.3_.Stl Top Nuts 2.8Mm X 6.2Mm, Bottom Nuts 2.85Mm X 6.3Mm For Users With Bigger Nuts Than Mine :P 4.30.19 Will Make A Separate Page For New 10Mm "Compact" Misumi Bearing Version That I Just Printed. Also, If You Are Good With Supports These Can Be Printed Upside Down To Make The Bearing Half Moon Print Cleaner.

Statistics

Category

Tags