J-Head Dual 40mm Fan Cooler
Description
Note: Due To Inherint Flaws In This Design, I Developed An Alternative Modular Cooling System For The Prusa I3 That Can Be Found At Http://Www.Thingiverse.Com/Thing:230654. I Suggest Checking It Out Before You Make One Of These. This Is A Dual 40Mm Fan Filament/J-Head Nozzle Cooler For The Makerfarm Prusa I3 With An Mk Iv J-Head Hot End And A Greg'S Accessible Extruder, Although It Should Work With Most Wade'S/Greg'S Extruders Using The Mk Iv J-Head. It Provides 330 Degree Cooling Of The Filament. One Fan Is Dedicated To Cooling The J-Head, The Other Is Dedicated To Cooling The Filament. ********** I Have Added A Mirrored Version Of The Dualfanflowdirectors360.Stl File, To Allow The Use Of 40Mm X 40Mm X 20Mm Fans For Filament Cooling In Place Of The 40Mm X 40Mm X 10Mm Fans, Since They Were Previously Obstructed By The Extruder Stepper Motor. **********
Statistics
Likes
56
Downloads
0