BladeScraper
Description
2018-03-14 - Uploaded Bladescraper-002.Stl - Disregard The First Two, This One Is Vastly Superior. - Uses 4 Magnets Now, Glue Them In. - Printed Mine At 0.08Mm, Pla. - Simple Blade Support That Helps Angle A Standard Large "Nt Cutter" / Snapoff Cutter Blade Correctly To Help Get It Under The Edge Of Prints While Avoiding Cutting Into Your Buildsurface. Https://Www.Google.Com.Au/Search?Biw=1376&Bih=644&Tbm=Isch&Sa=1&Q=Nt+Cutter+Blade&Oq=Nt+Cutter+Blade 2017-10-15 - New Version: Bladescraperc-Layer0@0.2Mm_Otherlayers@0.1Mm.Stl - Closer Tolerance Against Rear Edge Of Blade, Allows Entire Scraper To Easily Slide Under Most Prints (Old One Tends To Catch On The Print). - Print Layer 1 As 0.2Mm, Other Layers At 0.1Mm - For Perfect As-Designed Alignment. 100% Infil May Be Useful, But Isn'T Required. - Uses Two 6X1Mm Magnets To Hold The Blade On. Glue The Magnets In. Https://Www.Aliexpress.Com/Wholesale?Catid=0&Initiative_Id=Sb_20171014070610&Searchtext=6X1Mm+Magnet - Designed For 0.4Mm Nozzle, As Before. Old Version Comments: - Use Smallest Layer Resolution Possible. - It Intentionally Does Not "Hold" The Blade So Once You Get It Under The Print Yo Can Remove The Block And Just Move The Blade Around Under The Print.
Statistics
Likes
2
Downloads
0