Tito biped robot PLUS
Description
Tito Biped Robot With Extras At Last Otto Diy Has An Updated Older Brother. List Of Parts: Arduino Nano With I/O Shield Small Female To Female Jumper Wires Buzzer Futaba Servo S3003 X4 180 Degree Movement Hc-Sr04 Ultrasound Sensor Max 7219 Led Matrix Nuts M3 X20 Screws M3X12Mm X20 Powerbank (Optional 3.7 Volt Lipo And Dc-Dc Boost Converter To 5 Volt) Or Just Use The Usb For Power The Arduino Board. Check The Otto Plus For Connections As This Is Based On This. The Hc-Sr04 Ultrasound Sensor Is Not Shown Connected In The Schematic; (Trigger To Pin 8 And Echo To Pin 9) For The Programming: Download & Install Arduino Ide: Https://Www.Arduino.Cc/ Copy Otto Plus Libraries To C:\Users\User\Documents\Arduino\Libraries (Or Wherever Your Library Folder Is Installed): Finally Open & Upload Otto_Smooth_Criminal.Ino Code To Your Arduino Nano For Dancing Otto. Any Problems Printing Or Making Or Programming? Join And Create A Topic In Our Group Http://Www.Thingiverse.Com/Groups/Ottodiy/
Statistics
Likes
45
Downloads
0