Captured Dollar Fidget Spinner
Description
Someone Asked If I Could Make A Captured Sackagawea Fidget Spinner To Go Along With My Other Captured Coin Fidget Spinners. So, Here It Is. I Used Fusion 360 For This Design. Still Learning It, So This Design Could Probably Be Improved. Designed For 1 Dollar In Each Hole Making My Cost $3.73 ( 3 Dollars, 1 Bearing, Plastic) This Requires That You Pause The Printer At About 55% To Drop The Dollars In. Link To Bearings That I Used Https://Www.Amazon.Com/Gp/Product/B01C9Xdpvq/Ref=Oh_Aui_Detailpage_O00_S00?Ie=Utf8&Psc=1 Link To Dollars That I Used Https://Www.Usmint.Gov/ Notes: At About 55% Complete You Need To Pause The Printing And Drop The Dollars In Use 1 Dollar Per Coin Hole Make Sure You Have The Sides Of The Coins Showing That You Want Caution - The Dollars Hold The Heat From The Bed Alot Longer Than The Plastic
Statistics
Likes
3
Downloads
0