Hard drive and SSD caddy for HP Z600 Z620 Z800 XW6600 XW8600
Description
This Is A Caddy For Hp Workstations Z600, Z620, Z800, Xw6600, Xw8600 Or Anything That Has At Least 2X5.25 Spaces Open. The Caddy Can Be Secured With The Built-In Latch, But It Is A Tight Enough Fit To Secure Itself By Friction Alone. It Can House 2X3.5+3X2.5 Drives. 2 Of The 2.5 Drives Can Be Ssd Or Hdd With 7-13.5Mm Thickness. The 3Rd One Will Fit A 7Mm Ssd Only. +++++++++++++ I Uploaded A Raid Version That Will Allow You To Use Additional 2.5 Drives Instead Of The 3.5 Ones Or In Any Valid Combination (9 X 2.5 Drives Or 5 X 2.5 Drives + 2 X 3.5). If You Don'T Use 3.5 Drives At All, You Have To Use The 1-Inch Spacers To Keep The Original Dimensions. You Can Get Commercial Brass M3 Spacers Or Use 8Xm3 Nuts. I Included A Design Here Too That You Can Print As Many Times As Needed. Use 30Mm M3 Screws Inside The Spacers.
Statistics
Likes
43
Downloads
0