Duplicator 6 BLTouch Mount
Description
Bltouch Mount For The Duplicator 6. For The Duplicator 6+ See The Mount By User Zauberflo: Https://Www.Thingiverse.Com/Thing:2894669 I Used The Holes For The Bearing Set Screw To Hold The Mount. Use M3X8 Or M3X10 Screws To Mount To Print Head. The Fork Of Firmware That I Update Once In A While That Supports The Bltouch Is Here: Https://Github.Com/Dot-Bob/Marlin-Duplicator-6/Tree/1.1.X-Bltouch A Precompiled Version Is Available Here: Https://Github.Com/Dot-Bob/Marlin-Duplicator-6/Releases/Tag/Auto-Marlin-1.1.X-Bltouch I Have Added Example Configurations To Marlin Mainline For The Standard Duplicator 6 That Can Be Modified To Add Bltouch Support If You Want The Latest And Greatest Version Of Marlin. Compare Configuration.H, Configuration_Adv.H, And Pins_Ultimain_2.H From My Fork For The Changes. See: Https://Github.Com/Marlinfirmware/Marlin Note: The Bltouch Is Wired To Both The Z Limit Connector And Analog Connector. Power Is From The Analog Connector Pins 2 And 3, Servo Signal Is Z Limit Pin 1, And Limit Function Moved To Analog Pin 1. I Wired Using A Four Conductor Ribbon Cable Using The Signals Mentioned Above.
Statistics
Likes
41
Downloads
0