GEMMA M0 Case
Description
3D Printed Case For Gemma M0 If You'Re Working On A Project Using The Adafruit Gemma M0, You May Want A Case To Protect It. This Simple Two Piece Enclosure Can House The Pcb And A 150Mah Lithium Ion Polymer Battery. Portable Gemma M0 The Pcb Is Secured To Two Standoffs With M2.5 (6Mm Long) Screws. We Have A Nice Assortment Of M2.5 Sized Nylon Screws And Nuts That Will Work Well. The Case Allows Access To The Microusb Port For Powering And Programming. A Slide Switch Extension Allows You To Power The Gemma M0 On And Off. To Keep The Case (Relatively) Slim, An Opening On The Cover Lets The Jst Connector Poke Through The Top. Https://Learn.Adafruit.Com/Gemma-M0-Case/Overview
Statistics
Likes
61
Downloads
0