Car w/ moving wheels (no assembly required)

Description

I'M No Car Designer, So Don'T Make Fun Of My Design! :) However, This Car Should Be Fun To Play With. Make Sure It Prints On Its Side. It Rolls Best On Rough Terrain But Can Roll On Paper. If You Want To Scale It I Recommend Not Going Past 75% Otherwise The Detail Will Start Disappearing. Windows Are Slightly Slanted And May Require Supports For Better Detail But Everything Else Does Not Need Supports. Once It Is Printed Turn The Wheels To Break Any Unwanted Attachment And You May Need To Cut The Axle Holder A Bit On The Edges To Make Sure There Is No Friction. If The Spoiler (Wing) Breaks I Recommend Soldering It Back On Or Super Gluing. This May Seem Crazy To Solder But You Take Your Solder Pen And Melt The Wing Back Together And Taking Some Of The Filament You Have And Melting It On To The Spoiler. This Is Quite Dangerous But It Works Very Well Don'T Do This Without Supervision And Stay Away From The Fumes That Come Off Especially If You Are Using Abs Because Believe It Or Not They Are Sightly Toxic (Use A Mask). I Hope There Is Enjoyment And Leave A Comment If Any Questions Arise.

Statistics

Category

Tags