Heavy Duty Universal Phone Holder
Description
I Don'T Acutally Recomend This, Its Too Big, But It Does Work If You Want To Use It, I Was Just Seeing What I Could Make. This Is A Phone Holder I Made To Be Used On A Bike Or Motorcycle. It Ended Up Being A Little Bigger And Heavier Than I Hoped But It Still Works Good, The Phone Won'T Come Loose No Matter How Hard I Shake It, Even With Weak Rubber Bands. To Attach It To The Bike I Strapped It On With Zip Ties And An Anti Slip Mat. The Largest Phone In The Pictures Is 6'' Long And All The Pictures Are With The Long Plate Size (There Is A Spacer In The Middle Because The Short Is Too Small For My Phone). The Small Phone Is 4.5 Inches Long (The Short One Would Fit It Well). The Plateshortv2 May Be The Best For Any Phone. Hardware Information: All Bolts Are 1/4 Inch <I>(The Holes Are 7Mm And The Nut Holes Are 12Mm Across The Flat Side.)<I> 1 1/2 Inch - 7X <I>(For The Top Holders And One For The Middle)<I> 1 Inch - 2X <I>(For The Sides Of The Mount. In The Pictures I Used 1 1/2 Inch And They Are Too Long.) <I> 1/2 - 2X <I>(To Connect The Middle. Can Use Zip Ties Instead)<I> Nuts - 11X 5 Rubber Bands The Only Thing That Needs Supports Is The Arm Bottom. The Top Holders Should Be Printed In The Orientation They Are In. The Arm Zip Is Part Of An Arm I Planed On Making But It Ended Up To Heavy To Work Right. It Can Still Be Used To Angle The Phone Different. The Gear In The Arm Is From <A Href="Http://Www.Martinsprocket.Com/Home">Here</A>. In The Future I Plan On Making A Better Version With An Extended Arm But That Might Be A While From Now.
Statistics
Likes
13
Downloads
0