SLA Platform Roller
Description
Roller For 3Dsystems Projet Series Sla Build Platforms. Will Also Work On Any Platform With The Same Hexagonal Pattern Of 1/4" Holes Spaced 1/16" Apart. I Typically Use It After Platforms Are Cured When The Stuck Supports Are Extra Crunchy So That They Come Out Clean. It Can Be Used After A Scrub In Alcohol To Avoid Stickiness, But The Supports Will Usually Be Softer Then. Printed In 3D Solutech Pla On A 2016 Flashforge Creator Pro.
Statistics
Likes
18
Downloads
0