Wanhao I3 Plus/Maker Select Plus Titan Aero mount
Description
This Is Highly Experimental And Requires Making Custom Cables And Modification Of The Stock Wiring Harness. I Take No Responsibility If You Cook Your Machine Doing This. Still Under Testing, I Have About 500 Hours On Mine Between A Few Revisions Of The Design. Works With Diiicooler, Uses The E3D Standard (Not Mirrored) Titan Aero, With Slight Reduction In Build Area. How Much Is Still Being Determined. This Replaces The Entire Metal Bracket That The Direct Drive Attaches To, Reducing Weight. New Adjustable End Stops Are Required And It May Or May Not Work With A Cobra Cooler, I Don'T Have One To Test But The Bearing Holder Bottom Holes Are Kept Free To Allow For Its Use. Photos Are Of A Prior Version, The Current Version Has A Space On Top For A Zip Tie To Hold The Wires In Place. Additional Parts Required To Be Printed: Https://Www.Thingiverse.Com/Thing:1394558 Qty 1 Https://Www.Thingiverse.Com/Download:3442143 Qty 2 Note: The Stops Linked Are For The 2.1, Not The Plus, Which Has A Different Mount For The Y Stop, Thus The 2 Z Stops. Just Trust Me.
Statistics
Likes
14
Downloads
0