Logitech C270 Camera Mount for Prusa MK2/S and MK3, with wide angle lens support.
Description
Update 2: Updated It With A Mk3 Version Of The Arm. If It'S A Bit Too Snug, Sanding The Top Of The "Fork" Is The Easiest (That Goes Between The Heatbed And Y-Carriage). Naturally The Fit Will Depend On Your Settings And Material. Update: I Made A New Frontplate To Support A 12V 40Mm Led Ring, With A Cover. (C270_Widelens_Frontplate_Led And C270_Widelens_Led_Cover) I Changed All The Parts For The C270 Camera Mount, And Made It Support A Cheap Wide Angle Lens. -It Will Require An Extra M3 Screw (Plus A Washer If The Head Is Small) For Attaching The Camera To The Arm, And An M4 Screw To Be Able To Adjust The Vertical Camera Angle. -The Frontplate And Backplate Will Require Two ~M2.5X12 Screws (Notune21 Hasn'T Specified, So This Is Just A Guesstimate). But I Used Two Small M3 Wood Screws I Had Laying Around, And They Seem To Have Worked Just Fine. I Found The Original Design Hard To Keep Aimed And The Extruder Assembly Kept Bumping Into The Camera During Auto Calibration. -The Arm Has Been Modified To Fit The Mk2S Buildplate, Shortened And Made In One Piece (Removing The Need For The Printed Plastic Screw). I Also Added Two Slots On The Back For Zip Ties. -The Mount That Screws Directly Into The Camera Has Had The Groove Removed. -The Camera Parts (Back Plate, Front Plate And Focus Ring) Have Been Modified To Support A Wide Angle Lens. I Used A Cheap Magnetic Lens Made For Cellphones.
Statistics
Likes
56
Downloads
0