12-Slot Payload Release/Cargo Drop for DJI Matrice 600 / S1000
Description
Controlled By A3 Shutter Channel. Release Single Slot Each Time When Pressing The Shutter Button. +5V Power From Sbus Port. Arduino Is Converting The Shutter Pulse To 12 Steps On Linear Servo. Make Sure You Have 148Mm (Matrice 600 Standard) Spacing Between Two Carbon Fiber Tubes. If You Are Using S1000 + Z15 Configuration, You Might Need To Get A Matrice 600 Series - Z15 Series Gimbal Mounting Connector And Print Out New Battery_Mounting_Bar To Get Correct Spacing. Part List: Actuonix 100Mm L12-R Micro Linear Servos 3Mm Carbon Fiber Rod M2.5 Screws 6-32 Bolts And Nuts Arduino Nano
Statistics
Likes
12
Downloads
0