RPi VESA mount
Description
Since Most Of The Vesa Mounted Rpi Cases Occupy The Same Space As The Monitor Mount I Designed An Off-Centre Case For The Raspberry Pi Which Still Allows Access To All The Ports. This Case Fits The Rpi Model B+, Rpi 2 And Rpi 3. You Will Need 4 X M2.5 X 10 Screws, 4 X M2.5 Nuts And Possibly Longer M4 Screws To Secure Your Monitor (These Are Mostly In The Range Of 20 - 25Mm Long). The Drawing Is Made For 3Mm Thick Material. The Assembly Requires Some Glue And Should Fit Snug Around The Board. The Raspberry Pi Cutouts Are Based On [This Design.](Https://Github.Com/Diy-Electronics/Raspberrypi-B-Plus-Case)
Statistics
Likes
13
Downloads
0