Ultimaker 2+ door
Description
This Is My Ultimaker 2+ Door . Easy To Install And Disassemble, Just Pull It Up. You Can Mount It Without Modifying The Printer Frame, Fix It With 3 Screws On The Left Or The Right Side. Parts Needed: 4Mm Acrylic Glass 270X290Mm, Hinge_Door: Super Glue To Fix It On The Acrylic Glass (Door_Drawing) Hinge_Printer: 3X M3 Flat Head Screw 25Mm; Lock: 2 Metal Springs 16Mm X 5Mm Diameter 4X M3 Cheese Head Screw 18Mm 1X M3 Chese Head Screm 20Mm To Install The Lock, See The Door_Drawing File Below For The Dimensions. Then Fix It According To The Drawing With A Clamp, Drill The 4 Holes 4Mm And Attach It To Mark The Breakthrough. I Made The Cut With My Dremel. Then Attach The Parts Lock_Lever And Lock_Outside On The Front Of The Door, Screw Thew Inner Bolt Part To The Lock_Lever. Put The Metal Springs In The Provided Holes And Add The Last Part Lock_Inside. You Need A Screw Driver To Get The Spring In The Hole From The Lock_Inside Part.
Statistics
Likes
10
Downloads
0