Martian II RunCam Split Side Plates With Buzzer
Description
Martian Ii Side Plates For The Runcam Split. Camera Has Tilt From 0-45Deg. Assembly Requires Qty 6 2Mm X 6Mm Screws. I Also Designed In A Spot For A 9Mm Od Buzzer. If The Buzzer Is Not Desired, Print The Non Buzzer Version Twice, Make Sure That The Part Is Mirrored In The Slicing Software To Ensure There Is A Left And Right Version. Same Thing Goes For If You Would Like The Buzzer On The Other Side, Simply Use The Mirror Feature In The Slicing Software. Version 1 Has The Camera Mounted 5Mm Forward Of The Center Of The Bracket, The Camera Is Still Protected. The Standoffs Will Be Visible When Using The Wide Recording Mode. Version 2 Has The Camera Mounted 10Mm Forward Of The Center Of The Bracket, The Camera Is About Flush With The Front Of The Quad. The Standoffs Are Not Visible, But The Tips Of The Props Are Visible In The Wide Recording Mode. Version 3 Has The Camera Mounted 13.5Mm Forward Of The Center Of The Bracket, The Camera Is Sticking Out Past The Front Of The Quad. I Have Not Tested This Configuration. Buzzer I Designed The Part For Is Here Https://Www.Amazon.Com/Betafpv-Terminals-Electronic-Continuous-12X9-5Mm/Dp/B073Rh8Tqk/Ref=Sr_1_7?Ie=Utf8&Qid=1503421661&Sr=8-7&Keywords=Drone+Buzzer Gopro Lense Here Https://Www.Amazon.Com/Vicdozia-Replacement-Degree-Camera-Cameras/Dp/B015Ee7G58/Ref=Sr_1_1?Ie=Utf8&Qid=1504278851&Sr=8-1&Keywords=Gopro+Lens Design Files Are Included For Easier Modification Video Of Runcam Short Lens Using V1 Of The Mount Https://Youtu.Be/Fh34Ckafwfw Video Of Gopro 170 Lens Using The V2 Mount Https://Youtu.Be/Phwpgpbflas
Statistics
Likes
15
Downloads
0