SuperTwinkie FPV Thing
Description
Enter The Supertwinkie Frame That Looks Just Like The Hostess Sugary Treat Of The Same Name (Hostess, Please Don'T Cease-And-Desist Me I Make No Money From This!) Continuing To Enjoy The Emax Babyhawk /Ft Gremlin Drive Train, I Wanted A Somewhat Balanced Micro Quad Frame Without Propellers In View. I Also Don'T Like Landing On My Batteries, Either, So It'S A Top-Mount Battery Frame. It'S Very Fun To Fly And Quite Tough, Even If It'S A Bit On The Heavy Side So I Fly With A Warranty-Busting 3S: Https://Youtu.Be/E-Wvwiltib8 I Separated The Body Into Two Pieces That Must Be Glued After Printing With Ca Glue. You Will Need No Supports With These Files Printed As-Is! :-) Disclaimer: I Cut My Frames In 1.5Mm Black Fiberglass G10 So I'Ve Not Flown With A Printed Version Of The Frame But It Should Work If You Print In Nylon, Pet, Etc. Depending On The Camera Used You Will Have To Drill A Hole For The Antenna And Also You May Have To Open Up The Alignment Holes In The Frame A Little (Or Just Cut The Nubs Off The Bottom Of The Body). This Little Frame Has Brought Me Hours Of Enjoyment, I Hope You Like It!
Statistics
Likes
22
Downloads
0