E3D Titan Modified Extruder
Description
The Gentleman That Originally Designed This Included The .Stp File For These Parts Thank You! I Have Done The Same: I Have Autodesk Inventor 2018 As A Student So I Have Included .Ipt; .Stl; And .Stp. My Modifications Are For An Lm8Luu (8X15X45Mm) For The Top Bearing And I Moved The Outermost Zip-Tie Mounting Holes 2.4 Mm Inwards (45.2Mm Bearing Pocket). I Have Also Counterbored The Screw Holes As M3 Is Nearly Impossible To Find In That Length By Me. I Have Modified Both For M3 And M4 Since M4 Is Typically Found In Longer Lengths Locally, At Least It Is By Me. I Have Also Extended The 3 Screw Mounting Points To Give The Titan Extruder Screws A Bit More Room. I Am Not Printing The M4 Parts Since I Counterbored The Screw Holes To Fit My M3 Screws, Just A Bonus Should Someone Not Have M3 Long Enough To Work. I Am Printing On A Stratasys Uprint Se So You Are Pretty Much On Your Own For Print Settings, 0.2-0.3 Should Be Fine And I Wouldn'T Print Less Than 30% Unless Using A Stronger Filament Than Abs. M4 I Might Print 40% To Avoid Part Failure, I Don'T Believe 30% Would Fail....You Don'T Want To Print Twice, Walls Might Be A Little Thin. Enjoy!
Statistics
Likes
2
Downloads
0