Belt Buckle and Medal Stand
Description
This Is A Stand For Displaying Belt Buckles And Medals. It Is Meant To Be Free Standing, Doesn'T Need To Be Attached To Anything To Be Used. It Will Fit Multiple Sizes Of Buckles Or Medals While Not Covering Any Detail Making It Great For Use In A Display Case. It Is Also Meant To Hold The Buckles Or Medals Fairly Vertical For Easy Viewing. It Was Also Designed To Not Use A Lot Of Material When Printing Or Take Up Space Which Can Be At A Premium In A Display Cabinet. Overall Size Is Approximately 2.5" Wide, 1.6" Deep, And 2" Tall. It Does Used Raised Feet To Eliminate Warping Issues While Printing, And To Be Able To Be Used On Surfaces That Aren'T Perfectly Smooth. Like My Other Models, It Is Also Small Printer Friendly Due To Its Small Size. For Reference, The Buckle Shown In The Photos Is 4 Inches In Diameter With The Main Plate 0.15" Thick, While The Medal Shown Is 2.75" In Diameter And .22" Thick. When Printing, Supports Are Required For The Bottom Surface Only The Top Overhang Is Designed To Not Need Supports While Printing. Should Be Printed Vertically, Not Horizontally As Shown In The Model View.
Statistics
Likes
15
Downloads
0