Stepper Motor z-axis Actuator
Description
**Update 9/26/2017** Added An Updated Three-Point Version For The Base And The Sled To Decrease Wobbling And A More Polished Design. ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// A Linear Actuator Designed To Move A Glass Tube Up And Down. It Readily Attaches To A Stepper Motor Face (Jamco-238538 Used In This Case). The Sled Moves Along The Wooden Parts Acting As Railing. For Assembly: **Parts** * 3X Wooden Sticks (~8Mm Diameter, 12Mm Height) * 2X Base * 1X Lead Screw * 1X Stabilizer * 7X Screws (3M) * (Optional) Rubber Piece For Added Stability **Tools** * Soldering Iron * Hot Glue Gun In Order To Open The Screw Holes On The Base, I Used A Soldering Iron To Heat The Screw And Pushed Into The Plastic. (*This Method May Cause Evolution Harmful Gases, Try It At Your Own Risk, Make Sure You Are In A Well-Ventilated Room And Do Not Inhale The Fumes.*). The Base And The Stabilizer Are Attached To The Wooden Railings Via Hot Glue. In Action: Https://Youtu.Be/Gc4Lbw_Uone
Statistics
Likes
4
Downloads
0