7-Day Pill / Capsule / Tablet Dispenser
Description
There'S A Few Good Pill Dispensers Here Already, But I Wanted Something To Help Me Learn Fusion 360 So I Decided To Design My Own. My Criteria Were That I Wanted It To Be Easy To Use And Easy To Refill; Secure Enough To Safely Store A Week'S Worth Of The Various Medications My Doctors Like Me To Take, Easy To See The Day Names (Without Having To Put On My Glasses), And I Wanted It To Be Reasonably Pleasing To The Eye. I Also Wanted Something Easy To Print That Doesn'T Require Any Supports, Or Any Non-Printable Parts. After Much Trial And Error, And Quite A Few Variations, I'M Finally Happy With The Result (And I Have Learned A Lot About How To Do Stuff In Fusion 360!). May 2018 Update: Uploaded A Stackable Body File. I Made The Floor A Bit Thicker And Added A Recess For The Bolt To Fit Into. Seems To Work Ok. You Might Want To Print With Support For This, But I Found With External Fill Set To Rectilinear It Wasn'T Necessary. Also Added A Plain Top (Without The Pattern). Also, For Those Who Were Interested In Printing With Transparent Filament, I Added A Top With Windows For Each Compartment. I Found I Get Best Transparency Results By Minimising The Number Of Layers And Lines, So When Slicing I Recommend A Layer Thickness Of 0.32 And Width Of 0.5. Also Set Your External (Top/Bottom) Infill To Concentric.
Statistics
Likes
498
Downloads
0