HTC Vive Controller Golf Club Handle Mount for use with The Golf Club VR
Description
Created To Be Used Specifically With The Golf Club Vr Golf Sim As It Allows You To Offset The Y-Axis Of The Vive Controller In Relation To The Virtual Club. Because It Can Only Offset The One Axis, The Physical Golf Club Grip Needs To Be Inline With The Vive Controller In Order To Feel Accurate In The Game. Https://Youtu.Be/_Iif_Mwkue8 Pieces Of Dwoodle'S Design Were Used As A Base For The Vive Controller Mount Portion. Https://Www.Thingiverse.Com/Thing:2071035 Printing: Important That The Base Pieces Are Printed On Their Side As Illustrated In The Included Picture And Using 4-5 Perimeters For Strength. I Used An Infill Of 30% And It'S Plenty Strong. Assembly: You Will Need 6 M4 Screws Of Various Lengths To Attach All The Pieces. I Am Using An Old 4 Iron Club Cut 8Cm Down The Shaft Below The Grip. Holes Need To Be Drilled Through The Club Shaft, Use The Printed Base_Clubmountside.Stl As A Guide For Drilling The Holes.
Statistics
Likes
30
Downloads
0