Heavy Duty E3D chimera/cyclops hot end adapter for CR-10 and other creality printers
Description
I Have A Plan To Do A Dual Extruder Cr-10 And I Love The Heavy Duty Mount That Graham Did So I Took It And Remixed It To Work With The Chimera Dual Hotend I Had To Cover Up The 3Rd Mounting Screw Hole But You Can Always Drill Out If You Need That Screw Although With The 2 Lower Screws And The Lip Going Over The Plate I Think It Will Be Very Solid I Haven'T Printed It Out But This Should Work For The Original E3D V6 I Might Have To Make The Feed Holes Bigger For The Clones If You Want To Do A Dual Extruder Set Up On Your Cr-10 I'Ll Leave A Parts List To What I Got Coming In The Mail (Ordered From China Going To Take Forever) 1 New Board That Can Handle 2 Extruders I Got The Mks 1.4 2 A New Lcd Controler Since Most Boards Dont Have An Sd Card Slot I Got The Touch Screen 3 A Dual Head And Adapter I Got A Chimera Clone 4 A Nema 17 Motor (I Got 2 Incase I Needed To Do A Dual Lead Screw) 5 An Extruder To Mount On Motor (I'M Printing Out Flex Extruders But Still Needed To Get Screws, A Spring And Pusher Gear And Baring) 6 Bowden Tube And Lots Of It (I Plan To Put Both Motors On The Top Bar So I Bought 2 600Mm Tubes) 7 Motor Mounts (I'M Printing Mine Out) 8 Lots Of Extra Wire, Heat Shrink, T Nuts And Screws
Statistics
Likes
27
Downloads
0