Bluey's House
Description
I Designed This Budgie Play House To Fit In A Medium Size Birdhouse. I Printed The Main House.Stl At 0.3 Mm, With Multiple Processes (20% In-Fill 0-30% Height, 5% In-Fill 30-70% Height, 20% In-Fill 70-100% Height), 60Mm/Sec With Some Custom Supports. I Printed The 2 Parts For The Sliding Roof At 0.2 Mm, With 10% In-Fill To Allow For Light To Pass Through (I Used Natural Pla For The Roof). The Design Was Scaled Down To 90% Of Original For All 3 Parts To Fit My Wanhao I3 Plus Print Bed. I Used Earl'S Multfill Filler On The Outside Walls Followed By 400 Grit (Wet & Dry) Sandpaper And Acrylic Paint (5 Coats) To Give The Play House More Of A Painted Wood Feel. If You Don'T Have A Budgie This Might Also Work Well As A Night Light :) ...
Statistics
Likes
18
Downloads
0