Prusa i3 MK2 X-Ends remake
Description
I Recently Purchased Some Pom Nuts From Robotdigg, But Noticed They Only Had 3 Mounting Holes. Since I Am Running A Custom Mk2 Clone, I Wanted Something Close To The Original With Little Modification, Enter The New X Ends. This Is A Modification Of The X-Ends From The Prusa Openscad Files To Include A 3Mm Hole On One Side (Normal) And A 2Mm Hole On The Other. With The Help Of A Small Hand Drill, You Can Pop A New Hole In The 3 Holed Pom Nut Without Compromising Its Structural Integrity. Needed: 2X Pom Nuts From Robotdigg. (25.4Mm Flange, 19.05Mm Center-To-Center Screw Hole Spacing, 12.7Mm Od Of Throat For Leadscrew) 2X M3X12 Screws 2X M3 Nuts 2X M2X12 Screws 2X M2 Nuts (+Other Screws/Parts/Etc That Make Up The Prusa X-Ends) Included Are My Modifications To The X-Ends.Scad File, And Resulting Stls For The Ends. As Well As Modifications To The Leadscrew Covers With Modified Screws For Tr8X2, Tr8X4 And Tr8X8 Leadscrews. I Also Added In Comments And Variables For Anyone Wishing To Tweak Settings. You Will Need To Grab A Copy Of The Following Files From The Prusa Github: Bearing.Scad Polyholes.Scad X-End-Idler.Scad X-End-Motor.Scad Releasing Under Gnu Gpl V3 As That Is What The Original Scad Files From Prusa Are.
Statistics
Likes
14
Downloads
0