Anet-A6 Octopi LCD backcover with camera
Description
This Is A Backcover For The Lcd Screen On The Anet A6 With Integrated Raspberry Pi Zero W And Rpi Camera 1.3. I Use This For Running Octopi On The Raspberry. 19.01.2018: Added A Version With Just 3Mm Holes Instead Of The M3 Nut Inserts. You Will Need: • Raspberrypi Zero W • Rpi Camera 1.3 (I Got Mine From Aliexpress.Com) • Camera Cable Zero To Rpi Camera 1.3 (This Is A Special Cable To Use The Small Camera Input Of The Rpi Zero Like This One: Https://Goo.Gl/8Mqoxh) •The Screws That Are Already Used To Hold The Lcd •2-4 M2 Screws To Hold The Raspberry •2 M1? Screws To Hold The Camera. I Used Glue, But There Are Holes, If You Want To Use Them. How To Get Octopi Running On Your Raspberry Pi Zero W: Http://Octoprint.Org/Download/ You Can Either Use The Usb Ports To Power And Connect To The Printer Or The Pinout Of The Rpi. You Can Find A Tutorial How To Use The Uart Connection To The Anet A6 Here: Https://Goo.Gl/Kmkc7Z. If You Use The Usb Ports, Note That You Will Lose Some Of Your Print Volume.
Statistics
Likes
18
Downloads
0