Optical Drive Enclosure
Description
I Made This Simple Optical Drive Enclosure. I Removed The Optical Drive From My Macbook And Replaced It With The Ifixit Optical Drive Hd Caddy, Leaving Me With A Sata Cable And The Original Optical Drive To Use Externally. This Is Set Up To Be Used With A Standard Optical Drive Without Any Face On It, And An Ifixit Sata Cable (But I'M Sure Other Sata Cables Would Fit Into The Port). I Printed It With Text On The Top But The Font Wasn'T Bold Enough To Make A Good Connection So I Uploaded The Top Piece Without Any Text On It. I Used Some M3X10Mm Bolts To Secure The Top. The Holes Are Not Threaded, But They'Re Purposely Sized A Little Smaller Than An M3 Bolt-Diameter So That The Threads Can Grip. It Takes A Little Coercion To Get Them In So I Suggest Installing The Bolts In Each Hole Prior To Installing The Top.
Statistics
Likes
10
Downloads
0