VESA Swivel plate (90deg)

Description

All Parts, Except For The Top Inner Race, Was Printed Without Support, As Supplied. The Top Inner Race Was Printed With Supports. You Need 32 Rollers Once Printed, Assemble The Bearing As Shown In The Video, Or Alternatively Refer To The Parts Listed Here, And Figure Out The Assembly Yourself :) #####You'Ll Need: * 8 M3X25Mm Bolts * 8 M3 Nuts * 4 M4 Nuts * 8 M4X16Mm Bolts * Some Kind Of Strong Spring. Pegs Are ~40Mm Appart, So Pick A Spring That'S A Bit Shorter. The M4 Bolts Are Specific To My Wall Mount And Monitor. Any Length Bolts Can Work, But Might Make Assembly Harder, As You'Ll Have To Insert The Bolts Before Assembling The Bearing. Video: Https://Www.Youtube.Com/Watch?V=Op2N33E6Gfi

Statistics

Category

Tags