Wanhao i3 Plus cooler fan
Description
The Original Cooler Makes Some Problems. So I Constructed This Own, It Is Much Better Then The Original. You Need: --- 2 Pcs. 40Mm Fan With 12-Volts --- A 2Pin Connector (Or You Cut The Original) --- 2 Pcs. M3 Hex Nut --- 2 Pcs. M3X12Mm Screws I Removed The Original 24-Volt Fan And Connected The 2 12-Volt Fans In A Series Circuit . I Printed Everything With Pla 0,2Mm Layer, 20% Infill And I Took Support For All Parts.
Statistics
Likes
66
Downloads
0