Small Aerated contained (for dessicant beads)

Description

Made This To Put In Silica Gel Beads After The Ones I Bought Ended Up All Over. Print It Standing Up As Set Up In The Stl File So You Don'T Need Supports Or Minimal Bridging. Might Look A Little Rough Because It'S Very Small Columns And Printers Don'T Like That. Print It (With A 0.4Mm Nozzle) 100% Infill, 2 Bottom, 2 Sides And 2 Top Layers. The Object Is Made With 0.8Mm Walls So That Fits Perfect With 2 Side Layers, Wich Means You Don'T Have An Gaps Between The Layers. It Probably Can Be Printed At 200% Without The Beads Passing Through The Slits. It Is A Little On The Small Side Of Things. Might Need To Sand The Slip-In Cap To Fit It In, The Tolerances Are Rather Tight.

Statistics

Category

Tags