Poor man's HVLP spray gun canister Campbell Hausfeld Husky
Description
9/1/17 Fixed Bottle2Bottle_Coupler And Made It More Printer Friendly. 8/31/17 Because Dropping $8.99 On A New Canister For Your Recently Purchased Second-Hand Sprayer Is Not Your Style! Print This Coupler And Stick-It To The Man. All It Takes: Two $1.99 Water Bottles And $1.00 Plumber'S Tape. Works Great. Tapered Threads. Tested On A Campbell Hausfeld Sprayer, But Noticed Identical Canisters On Husky Sprayers. Sprayer Thread Size Is 5/8 Fine American Standard Size (Or M16 With A 1.5Mm Pitch). Instructions: Step 1. Find 2 Water Bottles With A 27Mm Thread Diameter. Think: Aquafina, Dasani, Dejablue, 20Fl Oz Mountain Dew. Heck, Even A 2L Pepsi Bottle Will Do. Step 2. Cut Entire Bottom Of One Bottle To Make Funnel. After Making Funnel, Use Bottle2Bottle_Coupler To Tighten Funnel Onto Second Water Bottle. Then, Pour Paint Onto Second Water Bottle. Step 3. Remove Bottle2Bottle_Coupler From Water Bottles And Tighten Bottle_Paint_Gun_Coupler To Bottle Containing Paint. Step 4. Tighten Bottle With The Bottle_Paint_Gun_Coupler Onto Paint Gun. Step 5. Use Knife And Slash A Breather Hole Onto Top Of Water Bottle Before Spraying. * Don'T Forget To Use Plumber'S Tape For Steps 2,3 And 4! These Water Bottles Have Non Sealing Threads And Leak With Out Plumber'S Tape! Printer Settings: *Pla! *.2Mm Layer Height (Threads Will Not Print Correctly If You Use .3Mm!) *3 Perimeters *You Might Want To Print Bottle2Bottle_Coupler With Support. *You Might Want To Slow Down Printer To 90% Speed.
Statistics
Likes
154
Downloads
0