OFC220 - Quadcopter
Description
This Is My Version Of A Mini "Racing Quad". An X-Type With A 220Mm Arm Span. I Tried To Achieve Easy Access To All Components, But Also To Keep The Build As Clean As Possible. Maybe It'S Not The Most Rugged Construction, But It Flies Perfectly With 3S Or 4S Lipo'S. All Screws In The Frame Are M3 And Are Countersunk. The Bottom Frame Can Be Printed On My Prusa I3 Type Printer In One Piece. I Don'T Need Detachable Arms, As I Can Print As Many Frames As I Want If It Cracks Someday. Which It Hasn'T Up To Today. Also I Never Use Action Cams On Top Of My Racing Quads, So There'S No Mount Foreseen. All The Components Are Attached To The Bottom Frame, So The Top Plate Can Be Removed Very Easily Without Any Hassle. Camera Mount Angle Can Be Changed In Cad With Just 2 Clicks If Needed. This Were My Design Considerations. The Whole Frame Was Done By Me From Scratch Just For My Own Purposes. It'S Very Modular, So If A Different Camera Mount Is Needed You Just Have To Design This Part With Your Changes Or Change Some Parameters For The Rx/Vtx Holder. Hope You Like It! :D **Components Used In My Build:** * Esc'S: 4X Fvt Littlebee 20A * Fc: Omnibus F4 Pro V2 * Pdb: Matek System Pdb-Xt60 * Motor: Racerstar Racing Version 2205 Br2205 2300Kv * Vtx: Eachine Tx526 5.8G 40Ch 25Mw/200Mw/600Mw * Rx: Frsky Xsr - 16Ch Telemetry Receiver
Statistics
Likes
28
Downloads
0