Swiss army knife style key holder (w/ knife, sim tool & flashlight)

Description

Used Parts From This Thing: Https://Www.Thingiverse.Com/Thing:304875 Used Parts From This Thing: Https://Www.Thingiverse.Com/Thing:478051 - - - - - - - - - - - - - - - - - - - - - - - - - - - There Is An Instructable With A Step-By-Step Guide Here: Https://Www.Instructables.Com/Id/Swiss-Army-Knife-Style-Key-Holder-W-Knife-Sim-Tool/ Updates: 2017.Aug.17- V2 Files Uploaded. The Only Difference Is That There Is A 3Rd M3 Screw (3Mm Shorter Than The Others No Nut. Yet|) In The Middle Of The Sides To Prevent Bowing. 2017.Sep.18- V3 Files Uploaded. The Utility Side Is Now Magnetically Attachached Which Makes It Really Easy To Remove If You Don'T Always Want To Carry It Around With You. - - - - - - - - - - - - - - - - - - - - - - - - - - - Parts Required: 2X M3 Screws (Length Is Variable Depending On The Number Of Keys You Have) 2X M3 Nuts 1X M3 Washer (Optional But Recomended For The - Side Of The Battery) 18Mm Cutter Blade/Knife ( You Will Lose At Least Half Of It So I Would Recommend Using An Old One) Sim Removal Tool Hard Wire Or Needle 3X 5630 Leds Or 1 Segment Of 5630 Led Strip Wire Push Button Aluminium (Aluminum) Tape Fast Drying Clear Adhesive (Or Opaque Will Offer Better Diffusion) - - - - - - - - - - - - - - - - - - - - - - - - - - - I Took The Key Holder From The "Swiss-Knife Key Ring" And Modified It To Fit My Keys, And Made The Hole Smaller. I Took The Knife Chanel And Slider From "Print Cutter Knife" And Modified To Take As Little Height As Possible. I Designed The Sim Removal Portion To Fit My Sim Removal Tool, I Am Not Sure Where I Got It So I Am Not Sure That Is Gonna Fit Other Ones. (Https://Goo.Gl/Kx61Gn) I Used A 5630 Led Strip Segment And De-Soldered The 3 Leds From It And Soldered Them Close To Each Other.

Statistics

Category

Tags